Network inventory: know what is on your network.

The smarter the building, the more devices on the network. The network inventory finds them all, shows them under clear names in your smart home and keeps fixed addresses reserved, even when a device is switched off.

Network switch with patch cables

What the inventory does for you

The result: no more address conflicts, and no more guessing what an unknown device on the network is.

  • Finds every deviceA regular automatic scan picks up every device on the network.
  • Clear namesInstead of cryptic identifiers, you give devices names you recognise. That is how they appear in your smart home.
  • Fixed addresses stay reservedEven when a device is switched off, its address stays reserved for it. Nothing is assigned twice.
  • “First seen” historyYou can see how long a device has been on the network. New devices stand out.

Typical situations

Lights, sockets, cameras, speakers: every new device makes the network harder to follow. Three examples where the inventory helps.

An unknown entry
Your router lists a device with a cryptic identifier. In the inventory you can see how long it has been on the network and give it a name as soon as you know what it is.
A device is suddenly unreachable
If two devices get the same address, one of them drops off the network. Because fixed addresses stay reserved, none is assigned twice.
A device was off for a long time
The garden lighting is switched off over the winter. Its address still stays reserved, and in spring it is back at the usual address.

Key terms in brief

If you want to understand your network, you will come across a few technical terms. Here is the essence of each.

  • IP addressA device's address on the network. Devices use it to find each other, for example Home Assistant and a camera.
  • DHCPThe service, usually in the router, that automatically gives devices an address when they switch on.
  • Fixed addressA device always gets the same address. This matters for anything other devices need to reach reliably.
  • Address conflictTwo devices use the same address. The result is dropouts whose cause is hard to track down.
  • MAC addressThe hardware identifier of a network interface. Many devices show up in the router with only this identifier or a manufacturer name.
  • VLANA logically separate subnet on the same cabling. It lets you keep smart home devices apart from office PCs, for example.

Frequently asked questions

Will I see when a new device joins the network?

In the device list. The “first seen” history shows how long a device has been on the network. New devices stand out, and you can name them straight away.

What happens to the address of a device that is switched off?

It stays reserved for that device. No other device gets it in the meantime.

Where do I see the device list?

In your smart home based on Home Assistant, under the names you have chosen. You use it via the app, a browser or a wall-mounted tablet.

Can I use the inventory on its own?

Yes. The 1x1-Smart Home components work on their own or as a complete system. They all interlock in Home Assistant.

How do you support the system?

Via the secure remote access, without opening a port in your firewall. If needed, we come on site in Berlin and Brandenburg.

How many devices are on your network?

We bring order to your home network and connect it to your smart home, in Berlin and Brandenburg.

0173 644 22 17
Discuss your smart home project